RG17/ 34 400mm circle with mounting system. Fits on both slimline or wide profile cones. Two bracketing systems available - Web Strap Plastic Bracket

This sign is used to give advance warning of major long-term work sites on Level 2/3 Roads where there is a possibility that a traffic queue will form. The distance shown is normally 1km Ie: the di...

Supplementary "__"0 km/h Ahead . This sign may be used for temporary traffic management on Level 2 and Level 3 roads. It is used to give advance warning of road works subject to a temporar...

This supplementary plate is used to indicate a Specialist Mobile Plant activity in operation ie: Grader, Mower You need to specifiy the activity required and it should be used in conjuction with t...

This supplementary plate is used to indicate a Specialist Mobile Plant activity in operation ie: Pavement Burner, Road Sweeper, Weed Sprayer, Skid Testing You need to specify the activity required ...

1 Line Supplementary - This sign should be used whenever any traffic management measures are implemented at a crash site This sign can be used on either Level 1 Roads or Level 2/3 Roads sign size ...

This sign is used on Level 2 & Level 3 roads when one or more lanes on the main road are closed and the normal off ramp taper has been extended to the lanes remaining open to the traffic. Thi...

1 Line Supplementary - This sign is used to indicate blasting operations in hand on or near the road and where there is a danger to road users from flying debris. When in use there should be Manua...

2 Line Supplementary - This sign must be used in conjunction with the Road Works sign to indicate maintenance work is being undertaken on a bridge. The sign can be used on either Level 1 Roads or L...

This sign should be used where driven stock crosses, or travels short distances along the road at infrequent intervals in locations where they can cause a traffic hazard. This sign should only be ...

This sign should be used where driven stock crosses, or travels short distances along the road at infrequent intervals in locations where they can cause a traffic hazard. This sign should only be u...

This sign should be used where road work sites have cement stabilisation being undertaken and vehicles traveling on a saturated pavement can become contaminated with cement splashes.

This sign is used where a formal pedestrian crossing place is no longer available because of road works or some other temporary type work activity. The pedestrian direction signs must be used to ...

1 Line Supplementary - This sign is used for events involving vulnerable road users. They must be erected on stands, as a static operation to warn road users of the event that is happening. This s...

Left Version shown - This sign should be used to guide cyclists to a temporary route or formal crossing point, and indicate the alignment of that temporary route when the normal path is not usable due...

Left Version Shown - This sign should be used to guide cyclists to a temporary route or formal crossing point, and indicate the alignment of that temporary route when the normal path is not usable due...

This sign should be used to guide cyclists to a temporary route or formal crossing point, and indicate the alignment of that temporary route when the normal path is not usable due to road works or som...

2 Line Supplementary - This sign is one of the vulnerable road user signs that are to be used for long distance events like walkers, runners, cyclists. The sign is erected on pilot vehicles accom...

This sign is used to indicate that there is a detour ahead and to follow the detour direction indicators. This sign can be used on either Level 1 Roads or Level 2/3 Roads sign size depicts what Lev...

This sign is used to indicate the end of a temporary detour route. This sign can be used on either Level 1 Roads or Level 2/3 Roads sign size depicts what Level it should be used on.

Direction Indicator sign consists of directional arrow and a symbol to determine the direction of the Detour, several symbols can be used for different routes. To be used to advise the direction of a ...

Direction Indicator sign consists of directional arrow and a symbol to determine the direction of the Detour, several symbols can be used for different routes. To be used to advise the direction of a ...

Left Version Shown - This sign is used to indicate a detour route, changes of direction of the route and also confirmation of the route where the direction might not be clear to drivers ie: At an inte...

This sign may be used within a road work site where traffic lanes in the same direction are required to pass either side of a hazard This sign can be used on Level 1 Roads

This sign may be used within a road work site where traffic lanes in the same direction are required to pass either side of a hazard. This sign can be used on Level 2/3 Roads

This sign is used to indicate the end of a section of road that has been signed with TW2.1 Flooding advance warning sign. This sign can be used on either Level 1 Roads or Level 2/3 Roads sign size...

This sign is used where the road or motorway exit ahead is closed. In normal circumstances an alternative route or detour will also be provided. This sign can be used on either Level 1 or Level 2/...

This sign is normally only used on multi-lane divided carriageway roads where one or more of the main road lanes have been closed and an off ramp exit lane has been extended to meet the lane remaining...

1 Line Supplementary - This sign may be used in advance of a site where it is likely that film making activities will present a hazard to normal traffic operation. This sign can be used on either L...

1 Line Supplementary - This sign should be used whenever fire fighting operations and or drifting smoke presents a hazard to normal traffic. This sign can be used on either Level 1 Roads or Level 2...

1 Line Supplementary - This sign is used whenever surface water is on the roadway and creates a hazard to traffic operations. Note: A depth of a few centimeters can be dangerous. This sign can ...

This sign is used where a formal footpath cannot be used because of road woks or some other temporary type of work activity and there is an alternative footpath on the other side of the road. This ...

Left version shown - This sign is used when the left lane is closed on four lane one way carriageways. The arrows indicate four lanes and one of them is closed and traffic is that lane must move in...

Right version shown - This sign is used when the right lane is closed on four lane one way carriageways. The arrows indicate four lanes and one of them is closed and traffic in that lane must more ...

1 Line Supplementary - This sign may be used in advance of a site where it is likely that funeral activities will present a hazard to normal traffic operations. This sign can be used on either Leve...

This sign should be used when a section of normally sealed road temporarily has a gravel surface. Once the surface has been resealed then the NEW SEAL supplementary should be added. This sign ...

This sign should be used when a section of normally sealed road temporarily has a gravel surface. Once the surface has been resealed then the NEW SEAL supplementary should be added. This sign ...

1 Line Supplementary - This sign is sued when grit is spread onto the roadway surface when ice forms. Additional signs spaced no more than 2 km apart, should be erected along sections of road w...

This sign is used to indicate that drivers must pass to the left of an obstruction or that the traffic lane is shifting to the left. This sign can be used on Level 1 Roads.

This sign is used to indicate that drivers must pass to the left of an obstruction or that the traffic lane is shifting to the left. This sign can be used on Level 2/3 Roads

This sign is used to indicate that drivers must pass to the left of an obstruction or that the traffic lane is shifting to the left.

This sign is used to indicate that drivers must pass to the right of an obstruction or that the traffic lane is shifting to the right. This job can be used on Level 1 Roads.

This sign is used to indicate that drivers must pass to the right of an obstruction or that the traffic lane is shifting to the right. This sign can be used on Level 2/3 Roads.

This sign is used to indicate that drivers must pass to the right of an obstruction or that the traffic lane is shifting to the right.

Supplementary Plate - This sign is to be ONLY used in conjunction with TW7-TW11 Lane Change or Closed signs. The sign panel is used to display the distance to the lane shift or closure.

This sign is used to augment other signs at road work sites where lime stablisation is being undertaken and vehicles traveling on a saturated pavement can become contaminated with lime or cement splas...

1 Line Supplementary - This sign should only be used when people or machines are working on overhead lines or poles within 5 m of the edge of the road. This sign can be used on either Level 1 Roads...

2 Line Supplementary - This sign is used in situations where logging truck movements occur to and from a road over relatively short periods (typically 4 to 6 weeks) while small forestry blocks are bei...

This sign is normally only used at work sites on two lane, two way roads to provide advance warning of manual traffic control. You are also required to use a Stop / Go Paddle as part of the traffi...

This sign is normally only used at work sites on two lane, two way roads to provide advance warning of manual traffic control. You are also required to use a Stop / Go Paddle as part of the traffic...

This sign is used when one or more lanes of the main road are closed and the normal on ramp taper has been extended to the lanes remaining open to traffic This sign can be used on Level 2/3 Roads.

This sign is used on, On-ramps to Level 2/3 roads when one or more lanes on the main road are closed. This sign can be used on Level 2/3 Roads.

2 Line Supplementary - This sign is installed in advance of a change to the road, or an intersection, layout. The sign must be erected for a minimum of two weeks following the change in the road. ...

1 Line Supplementary - This sign should be used as soon as new sealing work has been completed and shall remain in position until all loose chip has been removed and new pavement markings have been in...

1 Line Supplementary - This sign is a supplementary plate indicating the extent of the road works. This sign is used where any type of work has resulted in a road surface inferior to that on the appr...

This sign is used to stop traffic turning into a hazard area and the direction advises which way you are unable to turn during the temporary work zone. This sign can be used on Level 1 Roads. Th...

This sign is used to stop traffic turning into a hazard area and the direction advises which way you are unable to turn during the temporary work zone. This sign can be used on Level 1 Roads

2 Line Supplementary - This sign is used in situations where road markings have been obliterated due to road work operations such as pavement water blasting or cutting and where use of the New Seal si...

2 Line Supplementary - This sign is used to indicate that there is a work site on a side road. The sign is used where the side road work area is too close to the intersection to meet the visibili...

This sign may only be used on two-lane, two way roads where the road useage is less than 1000 vehicles per day and the road effectively reduced to a single lane. This signs can be used on Level 1 R...

This sign may only be used on two-lane, two way roads where the road usage is less than 1000 vehicles per day and the road effectively reduced to a single lane. This signs can be used on Level 1 Ro...

This sign may only be used on two-lane, two way roads where the road usage is less than 1000 vehicles per day and the road effectively reduced to a single lane. This signs can be used on Level 1 Ro...

This sign is used in an emergency situation to indicate a temporary hazard exists on or adjacent to the roadway. This sign must be used in conjunction with a supplementary plate describing that h...

This sign is used in an emergency situation to indicate a temporary hazard exists on or adjacent to the roadway. This sign must be used in conjunction with a supplementary plate describing that h...

Left Version shown - This sign is used to guide pedestrians to a temporary route or formal crossing point, and indicate the alignment of the temporary route, when the normal facility is not usable due...

Left Version shown - This sign is used to guide pedestrians to a temporary route or formal crossing point, and indicate the alignment of the temporary route, when the normal facility is not usable due...

This sign is used to guide pedestrians to a temporary route or formal crossing point, and indicate the alignment of the temporary route, when the normal facility is not usable due to road works or som...

2 Line Supplementary - This sign is used either in advance of a traffic survey sign TW2.12, or it is the supplementary plate for the Manual Traffic Control sign. This sign can be used on either Lev...

This sign can only be used after formal authorisation by the controlling authority is given to advise that the road is closed to ordinary vehicular traffic whilst road works or other legitimate activi...

This sign is erected at all attended work sites. The sign can also be used at unattended work sites where there are hazards within 5m of the edge of the road. This sign should only be display...

This sign is used where the road or motorway exit ahead is closed. In normal circumstances an alternative route or detour will also be provided. This sign can be used on either Level 1 Roads or Le...

2 Line Supplementary - This sign is used to indicate that road marking is being carried out This sign can be used on either Level 1 Roads or Level 2/3 Roads sign size depicts what Level it should ...

This sign is erected at all attended work sites. The sign can also be used at unattended work sites where there are hazards within 5m of the edge of the road. This sign should only be displayed...

1 Line Supplementary - This sign is used for events involving vulnerable road users. They must be erected on stands, as a static operation to warn road users of the event that is happening. This s...

2 Line Supplementary - This sign is one of the vulnerable road user signs that are to be used for long distance events like walkers, runners, cyclists. The sign is erected on pilot vehicles accom...

2 Line Supplementary - This sign should be used when multiple seal repair patching work is being carried out on a section of road less than km in length. Where the road length is greater than 1km t...

This sign should be used where driven stock crosses, or travels short distances along the road at infrequent intervals in locations where they can cause a traffic hazard. This sign should only be ...

This sign should be used where driven stock crosses, or travels short distances along the road at infrequent intervals in locations where they can cause a traffic hazard. This sign should only be u...

2 Line Supplementary - This sign is used to indicate that the shoulder is closed off by road works on a trafficable road. The sign must be removed as soon as the work has been completed. It is t...

2 Line Supplementary - This sign should be at intersections where the traffic signal control sequence had changed. The sign should remain in place for at least two weeks following the changes.

Signals Not Working supplementary sign is used in combination with a OTHER HAZARD sign. For use on Level 1 & 2 roads.

Single Lane – This sign is to advise vehicles to give way to oncoming traffic on a single lane road around road works where manual traffic management is not in use. This sign is used in combinatio...

Single Lane – Priority This sign is to advise vehicles of priority on a single lane road around road works where manual traffic management is not in use. This sign is used in combination with the ...

1 Line Supplementary - This sign is to advise vehicles to give way to oncoming traffic and is normally used with a single lane give way sign. This sing is used on Level 1 Roads.

This sign may be erected at the approved access point to a work site located adjacent to the road, when the site access is directly off a live traffic lane on that road. This sign must be covered o...

This sign may be erected to give advance warning of the approved access point to a work site located adjacent to the road when the site access is directly off a live traffic lane on that road. This...

This sign should be used where road construction or maintenance machines carry clay or other materials onto the roadway surface which consequently may temporarily become greasy when wet. This sign ...

This sign should be used where road construction or maintenance machines carry clay or other materials onto the roadway surface which consequently may temporarily become greasy when wet. This sign ...

This sign should be used wherever part of the roadway is affected by slips or other fallen debris. Where several such sections of road occur in close proximity the first may be be augmented with an...

This sign should be used wherever part of the roadway is affected by slips or other fallen debris. Where several such sections of road occur in close proximity the first may be be augmented with an...

This sign is used to indicate a temporary speed limit in a work site area to give protection to works on the roadway or in the immediate vicinity. Also it can be used to protect new road surfacing....

This sign is used to indicate a temporary speed limit in a work site area to give protection to works on the roadway or in the immediate vicinity. Also it can be used to protect new road surfacing....

This sign is to be used by a properly trained person to control traffic at the work site on two lane roads were only one traffic lane is available and where the use of temporary traffic signal is eith...

Surveying supplementary sign is used in combination with a ROAD WORKS sign. For level 1 & 2 roads.

Temporary supplementary sign is to show the speed restriction is temporary. These are placed at the beginning of a restricted speed zone. To be used in combination with SPEED RESTRICTION sign. To be u...

Thank you supplementary sign is used at the end of the work site. Alternative sign is WORKS END THANK YOU. To be used on Level 1 & 2 roads

Three Lane One Way Road sign indicates the road ahead shifted off from the normal road alignment to bypass a road work site A supplementary sign displaying the distance to the lane shifted. To be used...

Three Lane One Way Road sign indicates the road ahead shifted off from the normal road alignment to bypass a road work site A supplementary sign displaying the distance to the lane shifted. To be used...

Three Lane One Way Road Closed sign indicates the left lane ahead closed and merging into the other lanes. A supplementary sign displaying the distance to the lane closure. To be used on Level 2 road...

Three Lane One Way Road Closed sign indicates the right lane ahead closed and merging into the other lanes. A supplementary sign displaying the distance to the lane closure. To be used on Level 2 roa...

Three Lanes Center Lane Closed is used to indicate the center lane is closed ahead. To be used on Level 1 & 2 roads. Showing: three lane one way centre lane closed to left. Also available - cen...

Traffic Signals sign is to indicate the temporary use of traffic lights due to road works. To be used on Level 1 roads.

Traffic Signals sign is to indicate the temporary use of traffic lights due to road works. To be used on Level 2 roads.

Traffic Survey supplementary sign is used in combination with a OTHER HAZARD sign. For use on Level 1 & 2 roads.

Tree Felling supplementary sign is used in combination with a OTHER HAZARD sign. For use on Level 1 & 2 roads.

Trucks Crossing supplementary sign is used in combination with a OTHER HAZARD sign. For use on Level 1 & 2 roads.

Two Lane One Way Road sign indicates the road ahead shifted off from the normal road alignment to bypass a road work site A supplementary sign displaying the distance to the lane shifted. To be used o...

Two Lane One Way Road sign indicates the road ahead shifted off from the normal road alignment to bypass a road work site A supplementary sign displaying the distance to the lane shifted. To be used o...

Two Lane One Way Road Closed sign indicates the left lane ahead closed and merging into the other lanes. A supplementary sign displaying the distance to the lane closure. To be used on Level 2 roads.

Two Lane One Way Road Closed sign indicates the left lane ahead closed and merging into the other lanes. A supplementary sign displaying the distance to the lane closure. To be used on Level 2 roads

Uneven Surface temporary sign consists of a UNEVEN SURFACE symbol displayed on a standard TW sign plate. To be used on Level 2 roads

Walkers supplementary sign is used in combination with a OTHER HAZARD sign. For use on Level 1 & 2 roads.

2 Line Supplementary - This sign is one of the vulnerable road user signs that are to be used for long distance events like walkers, runners, cyclists.

Washout supplementary sign is used in combination with a OTHER HAZARD sign. For use on Level 1 & 2 roads.

Wet Tar supplementary sign is used in combination with a ROAD WORKS sign. For Level 1 & 2 roads.

Works End supplementary sign is used at the end of the work site. Alternative sign is WORKS END THANK YOU. To be used on Level 1 & 2 roads.

Works End Thank You supplementary sign is used at the end of the work site. Alternative signs are WORKS END or THANK YOU supplementary . To be used on Level 1 & 2 roads